Accessories

- Cover protects your bike from dirt and water when transporting it on the rear bike rack of your car - Easy to mount, very little impairment of visibility while driving, and suitable for trunk or hitch-mounted bike racks - Fits the contours of your bike with special straps - Material is durable, waterproof, and UV Protective - MTB version fits: Mountain bikes and e-bikes with handlebars up to 80cm - Road version Fits: Road Bikes with drop bars

- Cover protects your bike from dirt and water when transporting it on the rear bike rack of your car - Easy to mount, very little impairment of visibility while driving, and suitable for trunk or hitch-mounted bike racks - Fits the contours of your bike with special straps - Material is durable, waterproof, and UV Protective - MTB version fits: Mountain bikes and e-bikes with handlebars up to 80cm - Road version Fits: Road Bikes with drop bars

With this practical hip bag, you always have all your essentials such as keys, mobile phone, and wallet at hand. The highlight: it is an up-cycled product and made from leftover, robust EVOC material surpluses. This gives it a colorful look and helps to save resources. - Upcycling – made from EVOC material surpluses - Main compartment closable with zip - Small zipped pocket on the back with integrated key clip - Adjustable hip belt with buckle - Can be worn as a crossbody bag over the shoulder

The Handlebar Pack Boa L is a spacious, waterproof, and quick-to-fix handlebar cargo carrier equipped with the Boa Fit System. - Quick access from both sides - Adjustable capacity due to roll-top closure - Durable and waterproof - For road bike, gravel bike, and MTB - Boa Fit System for easy and secure fixation - 100% waterproof - Enough space for extra rain jacket, extra clothes, snacks, tools, and spare tube

The Handlebar Pack Boa M is a spacious, waterproof, and quick-to-fix handlebar cargo carrier equipped with the Boa Fit System. - Quick access from both sides - Adjustable capacity due to roll-top closure - Durable and waterproof - For road bike, gravel bike, and MTB - Boa Fit System for easy and secure fixation - 100% waterproof

The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow. - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Can be filled with hot or cold water (up to 60°C) - Volume: 2L - Weight: 140g - Measures: 17 x 32 x 1cm

The Chain Cover MTB prevents your bike (and other items to be transported) from getting soiled or damaged by the bike chain. - MTB-specific chain cover - Max chainring size: 38T - Compatible with single and double chainrings - Velcro fixation - Separation flap between chainstay and chain - Abrasion- and tear-resistant, polyurethane-coated material

The Race Belt is a hip pack that has been optimized for use in racing with fastening options that gives the rider direct access to tools and spare parts. It's a snug-fit and comfortable carrier system that can be worn under the jersey. - Airoflex hip belt and Air Pad System for ideal carrying comfort - Perfect pocket management—a place for everything - Elastic mesh pockets with Velcro fastening in the back & on left hip - Zippable pocket on right hip - Loop for mini-pump or CO2 cartridge & inflator

EVOC's Seat Pack Boa makes for useful extra storage on your bike; and it doesn't affect your riding, even when it gets rugged! This is an on-bike storage option that offers all the familiar top quality and functionality that EVOC is known for. - Adjustable capacity due to roll-top closure - Dropper post compatible - Soft TPE seatpost protection - Flexible main compartment closure that adjusts to bag size - Boa Fit System for easy and secure fixation - 100% waterproof - Enough space for extra jersey, tools and spare tube

EVOC's Seat Pack Boa makes for useful extra storage on your bike; and it doesn't affect your riding, even when it gets rugged! This is an on-bike storage option that offers all the familiar top quality and functionality that EVOC is known for. - Adjustable capacity due to roll-top closure - Dropper post compatible - Soft TPE seatpost protection - Flexible main compartment closure that adjusts to bag size - Boa Fit System for easy and secure fixation - 100% waterproof

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

- Heavy-duty steel brackets that accommodate lights of virtually any size or shape. - Sold in set of 2

There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.

Got a Texas-sized SUV equipped with Yakima's MegaWarrior rooftop carrier? Then you may need Yakima's MegaWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 22 inches and 40% more carrying capacity to Yakima's MegaWarrior rooftop basket (sold separately).

This additional On-Off Elbow can be used to add a second outlet valve to your RoadShower, making it easier to add accessories. Product Details - Attaches easily to the extra 1/2" outlet port on the RoadShower for water access on both ends. - Elbow includes a shut-off valve that can be used to regulate water outlet pressure for different uses. - Allows you to attach the RoadShower hose or any other garden hose. - Makes it easy to switch the hose to either end, or to add the shower head accessory. - Limited One Year Warranty

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

- E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring - Center clearance for E-Bike wiring is 0.812". 12-spline 23mm OD tool fittings - Made in the USA

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904

- Machined to match manufacturer specifications and designed to be used with a 1/2" drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body - Anodized in Wheels MFG red.

Keep your investment protected with a secondary retention strap for your Range Extender.

A durable, carry-everything full frame pack that installs quickly to let you adventure farther. - Available in four sizes to best fit more frames and adventures - Mount with thumb screws (sold separately) to bikes with integrated boss mounts - Large main pocket and smaller compartment pocket make it easy to stay organized - Gold lining and internal mesh pockets make finding your gear a cinch - Water-resistant construction helps keep your gear dry - Durable materials and robust zippers are designed to last

The Trek Adventure Frame Bags stores all your gear inside the profile of your bike frame, making it your go-to bag for everyday adventures, extraordinary feats, and every ride in between. Go ahead, make an understatement With a bag this integrated, you'll forget you're hauling gear. Tucked under the top tube, the Trek Adventure Frame Bag securely mounts on your bike with thumbscrews or straps to let you bring all the gear, snacks, and accessories you need to make every ride an adventure. PRODUCT DETAILS - Simply measure your bike to find the best frame bag size for you - Includes thumbscrews to mount on the Checkmate SLR & Checkpoint SL Gen 3 and straps to mount on any bike - Easy, two-sided access with internal and external pockets and collapsable divider to stay organized - Reduce knee rub by easily adjusting the strap to sinch the contents of your bag - Designed with durable, lightweight Ultragrid™ Ripstop material made from recycled pre-consumer nylon - The interior lining is made from recycled plastic bottles for a more sustainable ride - Water-resistant construction helps keep your gear safe and dry

The easy button for inflation Air Rush is a compact mini electric pump that makes flat fixes a breeze. It easily tops up tires pre-ride or fully reinflates two tires from flat, so you can get back to your ride sweat-free. Its bright digital display shows target pressure, current pressure, battery charge, and pressure units, while three simple buttons make operation easy. Plus, a single charge replaces up to four 16g CO2 cartridges. Product details: - Battery charges in less than an hour via a USB-C port - Presta, Shrader and needle valve adapters are included - Displays pressure in PSI, bar, and kPa - Inflation pressure range: 2 – 120 PSI - Net weight: 3.8oz. (108g) - Size: 3.15 x 1.77 x 1.26in (80 x 45 x 32mm) - Replaces up to four 16g CO2 cartridges with one single charge

Rack 'em up Turn your ride into a pedal-powered grocery getter with the Trek BackRack MIK Bike Rack. The updated design means it's compatible with even more bike frames, making it your go-to bike rack for most bikes. Direct-mount installation is quick and easy with the included hardware that secures into the eyelets already built into your frame. Threaded accessory eyelets add functionality and easy light installation. Plus, it's MIK compatible so you can securely mount MIK trunk bags or accessories in seconds. The additional height makes it easy to mount with all bikes, including mountain bikes like the Trek Marlin. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags or panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Compatible with inboard style disc brakes (brake mounted between seatstay and chainstay) - Additional height makes it compatible with more bikes including the Trek Marlin - Max weight capacity 25kg (55 lbs.), not intended for use with child carriers

A quick and easy clip-on fender designed to work with the Trek Blendr Saddle Bag and Blendr saddle accessory mounts. The Blendr Fendr clips onto rear saddle mounts in seconds to prevent water and road kick-up from getting you dirty. Quick and easy installation and removal keep you ready to ride no matter the weather. Plus, you can easily mount a rear light to keep you seen. Details: - Connects to the Blendr Saddle Bag mount and Blendr Saddle Accessory mount - Lightweight plastic keeps your backside dry with almost no weight penalty - Integrated light mount makes it easy to quickly add a fender and rear light - Fits into a back jersey pocket or easily into a bag - Compatible with all wheel and tire sizes for road, gravel, and commuter bikes