Brakes/Levers/Pads

- BMX aluminum levers for caliper or U-brakes - 2-piece hinged clamp

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

- Exceptional heat management - Rounded edge - UCI approved for road competition

- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel

- Optimum Heat dissipation - Reliable performance from Cyclecross to Downhill - High durability, even in the toughest conditions - UCI approved for road competition - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Avid - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM - Guide Ultimate,RSC,RS,R,T

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Shimano: - Dura Ace BR-R9170 - Ultegra BR-R8070 - XTR BR-M9100 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305 Tektro: - HD-R310 - REVER - MCX1 Flat Mount

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

This Shimano Alivio BL-T4000 V-Brake Lever Set is compatible with all long-pull brakes, including linear-pull brakes and mountain-style mechanical disc brakes. - Compatible with V-brakes and MTB mechanical disc brakes - Adjustable reach - Brake Lever Use: Pair - Cable Head: Mountain - Brake Lever Actuation: Long Pull

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

- 107mm arch gives a better mud guard clearance - Updated rubber boots - Strong braking power with excellent braking control

- Pair of D-Type disc brake pads without fins, for 1 caliper - Available with Resin or Metallic brake compound - Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers - Can be used as a lower cost alternative to H-Type or N-Type pads - Includes spring and pin

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Aluminum - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

With a low-profile Flat Mount design, the Shimano GRX BR-RX810 hydraulic disc brakes provide greater control for mixed-terrain riding. - Excellent heat dissipation - Flat mount and anti-mud specification - Convenient tool access - Simple wheel replacement - Easy and clean bleeding system - Simple set up and maintenance

- Pair of H-type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits Shimano 4-piston calipers Saint BR-M820 and BR-M810, Zee BR-M640 & XT BR-M8020 - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than D-type pads - Includes spring and split pin

Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical downhill stretches - Longer lasting than D-type pads - Spring included Model Compatibility: Shimano BR-M9120, BR-M8120, BR-M8020, BR-M7120, BR-M820, BR-M810, BR-M640, BR-MT520

- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than D-type pads - Spring included

- Shimano, BR-7900 R55C3 Replacement cartridge pads, pair - Also fits BR-6700 and BR-5700

- Shimano's flagship disc brake rotor, now available in ISO 6-Bolt mounting version - Features ICE TECHNOLOGIES FREEZA, a proprietary fabrication technique consisting of a 3-layer aluminum and stainless steel structure and special high heat dissipating treatment allowing for superior cooling and performance - Reduced power fading ensuring consistent high performance even on long downhill stretches - Helps increasing brake pads life and reducing noise

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads

- Shimano, SM-RT66 Rotor, 220mm, ISO - Stainless steel rotor

Shimano, SM-MA-F203P/P, Disc brake adapter for Post Mount caliper, Front, Post Mount fork, 203mm rotor