Cables

Shimano E-Tube wires and connectors - Frame grommets for E-tube internal-wiring compatible frames are sold separately, see Shimano Frame Grommet Kit Electronic Shifter Extra Parts - Ultegra Di2 wires utilize Shimano's e-tube technology; e-tube is a two-prong system and is NOT cross compatible with Dura-Ace 7970 Di2 wiring - All e-tube wires may be used for internal or external applications

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement. - Pro Slick Polished inner cables reduce friction and have no coating to wear off - Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance - Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included - Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing - Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits - Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Rejuvenate the performance of your drivetrain with this convenient and valuable kit that includes all parts needed for installation. - This convenient and valuable kit is the key to restoring your shifting performance - Compatible with Shimano and SRAM drivetrains - Stainless steel cables are each 2300mm long, for front and rear shifting - Compressionless housing comes pre-lubed is 3200mm long - Kit includes Comp shift ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched - Diameter: 4mm

Improve the performance of your shifting with fresh cable and housing. - Entry-level cable and housing set is great for servicing heritage bikes on a budget - Galvanized cable is corrosion resistant and comes pre-stretched - Includes one 1900mm cable and 1750mm of outer housing

- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof

Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5. 75mm - Overall length: 12. 7mm - Material: brass - Bottle of 50pcs

Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: brass - Bottle of 50pcs

- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

Genuine replacement parts All the parts you need to keep your Boone fresh. For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team

Genuine replacement parts Keep your bike safe and operating as it should. Keeps your cables and housing under control. - Replaces any 5mm X 28.6mm headset spacer to improve cable housing management - Compatible with threadless forks only

Genuine replacement parts Original Trek Fetch+ 4 cable guides Original Fetch+ 4 repair part - Set of 2 cable guides (Left + Right) - To guide cables around the steerer tube

Genuine replacement parts For optimal functionality. Replacement steer cable mount for your cargo bike. - Mounts front brake cable - Fastener kit not included

Genuine replacement parts For proper assembly. For optimal integration. - 10 pack - For 22.2 - 31.8mm handlebars

Genuine replacement parts Securely holds hub motor power cable in place. Original equipment replacement parts for your ride. - See your bike's specific product page for compatibility - Includes mounting hardware

Integrates seamlessly into the frame.

Get your cables under control. - Designed for use on Top Fuel 29 2020-2021 - Reversible to meet cable routing differences in Rock Shox vs. Fox shocks