Parts & Accessories
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
- Allows installation of 2-bolt SPD-style cleats on select Bontrager Road shoes - Compatible with Bontrager road shoes with nylon sole - Adapter plate replaces rubber plug in sole of shoes - Packaged as pairs
Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding
Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene
Protect your little piggies With the Windshell Toe Cover, your feet retain an extra dose of warmth thanks to windshell material that is windproof and water-resistant no matter if riding on the road or mountains. - Windshell material provides insulation and protection during windy and wet riding - Integrated pull tabs for easy on and off - Designed for use with road or mountain shoes for maximum versatility - Soft elastic band above ankle for added coverage and comfort Specifications - Temperature use (high): 70 deg. F - Temperature use (low): 50 deg. F - Fiber content: 78% Rubber / 15% Nylon / 7% Polyester - Material: Woven - Sole Construction: Closed with holes for clips
Power saving, round pedal stroke and a healthy foot arch make the SQlab insoles a must for every foot in a cycling shoe! Suitable for all cycling shoes, but also for normal shoes which are used for cycling, as well as for other uses. Developed in collaboration with ex-runner-up triathlon World Champion and foot expert Bjorn Gustaffson, SQlab has developed insoles that support the specific requirements found in cycling for the weaknesses of the respective foot type.
- 100% reflective outer-facing panelling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, heel loop, calf hook & loop adjustor and open sole - Reinforced toe and heel to be worn with cycling shoes
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
The FS260-Pro Nemo Overshoes help keep your feet warm on even some of the coolest, dampest days. Superstretch neoprene is used to ensure a snug fit over your shoes. A stretchy, abrasion-resistant sole and hard-wearing aramid stitching make this an overshoe that can be used time and time again. - High-stretch fabrics provide zipperless access - Superstretch waterproof thermal neoprene upper - MTB and road cleat compatible sole - Stretch abrasion-resistant sole/heel - Hard-wearing stitching using aramid thread - Reflective trim
Offering multi-season protection from the elements, the FS260-Pro Slick Overshoe II comes in a compact and lightweight construction. - High stretch waterproof PU upper - Open sole design with durable toe panel and instep crank rub protection - Deep elastic cuff with silicone gripper - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
Water Frozen In Your Bottles? No Problem. Keep Riding Year Round With The Ultimate Cold Weather Overshoe That Keeps Your Feet Dry And Cozy In Even The Worst Of Weather. The Freezing Point Overshoe II is the next generation ultimate cold-weather riding overshoe. Rigorously tested in the depths of Scottish winter to give you the confidence to get out on your bike without having to worry about losing all feeling in your toes. Comfort was a key consideration when updating the Freezing Point Overshoe II. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, while a thick brushed internal face fabric provides warmth and comfort. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Fleece-lined neoprene construction - High-cut design for extra protection - Raw-edge neoprene with an inner silicone strip around the ankle to prevent movement and help keep water out - Offset rear zip with snap-down puller and zip guard - Hard-wearing aramid sole and stitching using aramid thread - Crank-rub protection print - Reflective details
Rugged Protection For Dirty Days On Your Mountain Bike Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear, and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulating layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Molded rubber toe cap with treaded underside to help climb steep muddy slopes - Asymmetric front seam for improved fit - Hard-wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank-rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee
Pro Performance, Waterproof Pull-on - High stretch, waterproof, multi fabric construction - Wipe clean PU front panels with soft superstretch neoprene ankle - Zipless, pull-on design for comfort and shoe hugging fit - Highly durable, indestructible sole fabric overlays - Raw edge cuff with silicone gripper - Reflective trim
- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats
Endura created the WP Gaiter Overshoes so you can train and enjoy the outdoors even in wet weather. These booties are completely waterproof with reflective accents. Their durable 3-layer nylon sole and elasticized stirrups fit a variety of footwear and cleats. With these shoe covers, you'll be ready when the storms roll through, regardless of which shoes you choose to wear.
Wind is the enemy on the road, Windchill is your protection. Perfect for cold and dry conditions these road overshoes encase your shoes in a cozy insulating shield. - Windproof softshell fabric upper with light brushed lining - Deep elastic cuff with silicone gripper - Highly durable sole fabrics - Instep crank rub protection - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening. Features a reflective strip on cuff for additional visibility.
96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening.
92% Nylon, 8% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, the Slipstream Strada features pre-opened cleat zones and heel tabs. Features an embossed DeFeet logo infused with glass beads for nighttime reflectivity.
58% Merino Wool, 35% Nylon, 7% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, the Slipstream Strada features pre-opened cleat zones and heel tabs. Features an embossed DeFeet logo infused with glass beads for nighttime reflectivity. Available in charcoal grey.
Get the advantage of more grip with the Sabertooth Toe Spike Kit. The super-strong forged aluminum design easily mounts to any mountain bike shoe with front toe ports for a tighter grip when navigating cyclocross barriers, run-ups, and any off-bike section in less than ideal conditions. Key features: - Aggressive, earth-churning design - Made from precision forged stainless steel - Includes stainless steel mounting hardware
Mix-and-match buckle and shoe colors to get that unique and customized look. Replacement buckles for those unpredictable times BOA shoe buckles work hard to keep your shoes secure and comfortable. No matter what happens, these original replacements will get them working like new. - Compatible with all Bontrager shoes using BOA® IP1 Fit System - Only includes the dial - no lace
Key features: - Replacement strap for buckled Bontrager Road and MTB shoes - Compatible with 2009-2015 shoes, or all straps with this shape - Sold in singles - For optimal hold, it's highly recommended to also replace the buckle
Replace your heel studs for like-new traction Squeeze more miles out of your Bontrager cycling shoes with these genuine Bontrager universal replacement parts. - Genuine replacement heel studs for your Bontrager road shoes - Maintains traction when walking off the bike - Includes mounting screws - Compatible with 2012 – 2016 Bontrager Road shoes
Dry feet equal happy feet For the wettest days when it seems the precipitation is never going to let up, the Waterproof Shoe Cover has you covered and will keep your feet warm and dry. Thanks to a thermal fleece lined fabric that traps body heat and taped seams with a waterproof YKK zipper, water stays out and warmth stays in. Product details - Fleece lined Stormshell fabric is waterproof while trapping warmth - YKK waterproof zipper and taped seams for ultimate protection and reliability - Designed for use with road or mountain shoes for maximum versatility Specifications - Temperature use (high): 75 deg. F - Temperature use (low): 55 deg. F - Waterproof Rating: 10,000mm - Fiber content: 45% Nylon / 35% Polyurethane / 20% Polyester - Material: Woven - Sole Construction: Closed with holes for clips
Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance
Page 1 of 1